Leyland 570216-1J
P76 (’73-’75)
( Pair )
Front Top Strut Mounts
Camber & Caster adj.
(Stage 1- Street)
$440.00
Brand : K-MAC
Make : Leyland
Model : Leyland P76
Year : 1973- 1975
Part Number: 570216- 1J (Pair)
K-MAC Leyland P76 (1973-1975)
Front Top Strut Mounts Camber & Caster adjustable .
(Stage 1- Street)
# 570216- 1J (Pair)
FRONT- Camber (AND ALSO CASTER) REAR- Camber ( AND ALSO TOE )
FRONT- Camber (AND ALSO CASTER)
REAR- Camber (AND ALSO TOE)
ALLOWS TO ADJUST TIRE CONTACT ANGLES. ESSENTIAL FOR MORE EVEN TIRE WEAR TRACTION, ALSO ADJUSTING FOR UNDERSTEER OR OVERSTEER.
KMAC unique design – Single wrench, precisely adjustable. Accurately under load, direct on alignment rack.
Allowing to adjust, increase Positive Caster to reduce dive, lift under brake and acceleration. Improve high speed directional control, Better turn in, Correctly resolve steering pull.
Unlike original OEM (unadjustable) mounts, KMAC Stage one kit (Street) P/N 570216-1J includes “ball race thrust bearing” for steering loads.
Easily accessible from Engine bay – Accurate under load, direct on alignment racks
While Stage 2 (Street /Race) P/N: 570216-2L and Stage 3 (Full Race) P/N: 570216-3L have extra H /Duty spherical bearing to align the Strut, then separate (85mm diameter) thrust bearings for steering loads !
ALSO KMAC MANUFACTURE: Replacement Front ANTI SWAY BAR in 27” diameter (P/N: 571011) complete with matching elastomer bushing
Also for the Rear (no bar factory fitted) bar in 20” diameter (P/N: 571021) including all attaching hardware.
*ALSO ● ● ● ● SEE COMPLETE RANGE OF “FRONT AND REAR BUSHINGS ” 1st. ITEM TO FAIL. ALL THE VERY LATEST DESIGN BREAKTHROUGHS (Experience of manufacturing performance bushings longer than anyone else – 1964). Resolving costly, premature bush wear with resultant wheel tramp, vibration, loss of traction under brake and acceleration.
CHECK LIST / EXTRA FEATURES KMAC BUSHES VERSES OTHER BRANDS: Where other brands merely replace “OEM rubber bushes with urethane “ to eliminate the OEM oil and air voids in the endeavour to improve brake and steering response. The problem here is that with today’s autos multi link arms and different mount angles, this inhibits the suspension arms traveling through their required arcs which can cause even more wheel tramp / loss of traction with arms binding, locking up and lead to breakage!
KMAC bushings therefore where required are “Mono ball / 2 axis / self aligning ” with the unique design providing more than two and a half times for both the load bearing area and shock absorption over of OEM bushes.
This KMAC design breakthrough also finally resolving once and for all the issue with “steel spherical bearings“. Their wafer thin teflon style liners used soon pounding out with resultant metal to metal contact, noise.
Also because of ever increasing speed of assembly lines virtually all today’s Autos now only have Front and Rear Toe “directional adjustment”. Most KMAC bushings therefore are adjustable for Camber and Caster allowing to change tire “contact angles” – essential to resolve costly premature edge tire wear and correctly fix steering pull.
THE ACTUAL KMAC “PATENTED DESIGN BUSH ADJUSTMENT SYSTEM” HAS REVOLUTIONIZED THE INDUSTRY – PRIOR TO THIS – THE LAST 40 OR SO YEARS HAS REQUIRED THE NEED FOR LABOUR INTENSIVE DISASSEMBLY AND BUSH REMOVAL. THEN THE INACCURATE TRIAL AND ERROR NEED FOR BUSH REPOSITIONING EACH TIME TO CHANGE ALIGNMENT SETTINGS. INSTEAD NOW WITH KMAC WE HAVE CHANGED ALL THAT – IT IS PRECISE SINGLE WRENCH ADJUSTMENT ACCURATELY ON CAR (UNDER LOAD) DIRECT ON ALIGNMENT RACK. THEN SECURED BY THE K-MAC UNIQUE “POSITIVE LOCK” SYSTEM.
