K-MAC Nissan 180SX, 200SX Gazelle, Silvia
Front Strut Plates Camber & Caster kit
(Stage 1- Street). # 542716- 1J

PRICED RIGHT ! K-MAC KITS

( Includes Both Sides )
Blue Tick FRONT- Camber (AND ALSO CASTER)
Blue Tick REAR- Camber ( AND ALSO TOE ) ..

PRICED RIGHT! KMAC KITS

(Include Both Sides)
Blue Tick FRONT- Camber
(AND ALSO CASTER)
Blue Tick REAR- Camber
(AND ALSO TOE)

Camber Image
.
CAMBER:
ALLOWS TO ADJUST TIRE CONTACT ANGLES. ESSENTIAL FOR MORE EVEN TIRE WEAR TRACTION, ALSO ADJUSTING FOR UNDERSTEER OR OVERSTEER.


Caster Image
.
CASTER:
Allowing to adjust, increase Positive Caster to reduce dive, lift under brake and acceleration. Improve high speed directional control, Better turn in, Correctly resolve steering pull.

​​

Camber Image
CAMBER :
ALLOWS TO ADJUST TIRE CONTACT ANGLES. ESSENTIAL FOR MORE EVEN TIRE WEAR TRACTION, ALSO ADJUSTING FOR UNDERSTEER OR OVERSTEER.
Note :
KMAC unique design – Single wrench, precisely adjustable. Accurately under load, direct on alignment rack.​

Caster Image
CASTER :
Allowing to adjust, increase Positive Caster to reduce dive, lift under brake and acceleration. Improve high speed directional control, Better turn in, Correctly resolve steering pull.

When 2nd Best isn’t Enough ….
ALL THE LATEST DESIGN BREAKTHROUGHS NOT FOUND IN OTHER BRANDS ….
( INCL. VERY LATEST 2024 UPDATES – SEE WEBSITE “ABOUT US” )
WHAT YOU WOULD EXPECT BEING THE LONGEST ESTABLISHED MOST EXPERIENCED ADJUSTABLE STRUT PLATE AND BUSHING KIT MANUFACTURERS WITH PROUDLY “IN HOUSE” MANUFACTURE – NOT SOURCING IMPORTS / RELABELING. ALLOWING TOTAL CONTROL OVER QUALITY AND WITH IT RAPID, CONSTANT DESIGN IMPROVEMENTS (Do appreciate any constructive ideas you can suggest in how we can further increase our market leadership).

SIMPLY REPLACE THE EXISTING TOP STRUT MOUNTS :  Steel with elastomer bushed centers and “captive” ball race thrust bearings for day to day commuter usage. Simply replace the existing top strut mounts (no modifications). Reinforcing the strut towers and with the unique KMAC patented design providing the biggest (and quickest) adjustment range of both Camber and Caster. Another KMAC Patented design feature allows this fast adjustment to be made accurately under load.

FEATURES / ADJUSTMENT RANGE : The strut towers and with the unique KMAC patented design providing the biggest ( and quickest) adjustment range of both Camber and Caster. Street / Race setting can be recorded and changed in 30 sections – just the time taken to loosen the 3 top mount nuts. Another KMAC Patented design feature allows this fast adjustment to be made accurately under load.

RESULT : Finally – The adjustment capability TO CHANGE TIRE “CONTACT ANGLES” to correctly resolve costly premature edge tire wear and steering pull. The result of other than showroom height conditions – day to day commuting, encountering high cambered roads, altered height through load carrying or lowering, fitting wide profile tires/wheels and curb knock damage. Along with the ability to improve traction understeer/oversteer.


*ALSO ● ● ● ● SEE COMPLETE RANGE OF “FRONT AND REAR BUSHINGS ” 1st. ITEM TO FAIL. ALL THE VERY LATEST DESIGN BREAKTHROUGHS (Experience of manufacturing performance bushings longer than anyone else – 1964). Resolving costly, premature bush wear with resultant wheel tramp, vibration, loss of traction under brake and acceleration.

CHECK LIST / EXTRA FEATURES KMAC BUSHES VERSES OTHER BRANDS: Where other brands merely replace “OEM rubber bushes with urethane “ to eliminate the OEM oil and air voids in the endeavour to improve brake and steering response. The problem here is that with today’s autos multi link arms and different mount angles, this inhibits the suspension arms traveling through their required arcs which can cause even more wheel tramp / loss of traction with arms binding, locking up and lead to breakage!

KMAC bushings therefore where required are “Mono ball / 2 axis / self aligning ” with the unique design providing more than two and a half times for both the load bearing area and shock absorption over of OEM bushes.

This KMAC design breakthrough also finally resolving once and for all the issue with “steel spherical bearings“. Their wafer thin teflon style liners used soon pounding out with resultant metal to metal contact, noise.

Also because of ever increasing speed of assembly lines virtually all today’s Autos now only have Front and Rear Toe “directional adjustment”. Most KMAC bushings therefore are adjustable for Camber and Caster allowing to change tire “contact angles” – essential to resolve costly premature edge tire wear and correctly fix steering pull.

THE ACTUAL KMAC “PATENTED DESIGN BUSH ADJUSTMENT SYSTEM” HAS REVOLUTIONIZED THE INDUSTRY – PRIOR TO THIS – THE LAST 40 OR SO YEARS HAS REQUIRED THE NEED FOR LABOUR INTENSIVE DISASSEMBLY AND BUSH REMOVAL. THEN THE INACCURATE TRIAL AND ERROR NEED FOR BUSH REPOSITIONING EACH TIME TO CHANGE ALIGNMENT SETTINGS. INSTEAD NOW WITH KMAC WE HAVE CHANGED ALL THAT – IT IS PRECISE SINGLE WRENCH ADJUSTMENT ACCURATELY ON CAR (UNDER LOAD) DIRECT ON ALIGNMENT RACK. THEN SECURED BY THE K-MAC UNIQUE “POSITIVE LOCK” SYSTEM.

Search by Vehicle