K-MAC Audi A1(2010- 2020), A3/ S3 (1996- 2003), TT MK1 Quattro(1999- 2006)
Front Top Strut Mounts, Camber (& Caster) Precisely Adjustable
(Stage 2- Street/ Race) .
# 141016- 2K (Pair)

Home-002
PRICED RIGHT ! K-MAC KITS
(With K-MAC Includes Both Sides !)
blue tick FRONT- Camber (AND ALSO CASTER)
When 2 nd Best isn’t Enough ….
Incorporating all below
“Unique” features :
( What other brands do not want you to know )
check mark
No structural modifications – Cutting, Welding, Drilling of Strut towers
check mark
Quickest Adjustment – Fast / Accurate from engine bay / ultimate under load –
With K-MAC no time consuming strut removal.
check mark
Camber (plus also “Caster”) adjustable.
check mark
Positive or Negative – up to “massive 7/8“ (22mm)” adjustment range.
check mark
Not 3/4” but “extra H/Duty” 7/8” I.D Teflon lined Spherical Self Align Bearings.
check mark
Then Incorporating “separate” – – Extra large 3 3/8” (85mm diam.) needle roller bearings for steering loads to prevent spring drag, binding.
check mark
Allowing fitment both “factory diam. springs” – and all brands of popular “Coil Overs” 60-70mm I.D
DON’T BE SOLD SUBSTITUTES
Genuine K-MAC – Get What You Pay For….
Extend Tire Life – Ongoing Adjustment !
OR IN THE PURSUIT OF FRONT ROW OF THE GRID LAP TIMES
(allowing to go deeper into the corners with increased traction & braking response)

Home-002
PRICED RIGHT ! K-MAC KITS
(With K-MAC Includes Both Sides !)
blue tick FRONT- Camber (AND ALSO CASTER)
When 2 nd Best isn’t Enough ….
Incorporating all below
“Unique” features :
(What other brands do not want you to know)
check mark
No structural modifications – Cutting, Welding, Drilling of Strut towers
check mark
Quickest Adjustment – Fast / Accurate from engine bay / ultimate under load –
With K-MAC no time consuming strut removal.
check mark
Camber (plus also “Caster”) adjustable.
check mark
Positive or Negative – up to “massive 7/8“ (22mm)” adjustment range.
check mark
Not 3/4” but “extra H/Duty” 7/8” I.D Teflon lined Spherical Self Align Bearings.
check mark
Then Incorporating “separate” – – Extra large 3 3/8” (85mm diam.) needle roller bearings for steering loads to prevent spring drag, binding.
check mark
Allowing fitment both “factory diam. springs” – and all brands of popular “Coil Overs” 60-70mm I.D
DON’T BE SOLD SUBSTITUTES
Genuine K-MAC – Get What You Pay For….
Extend Tire Life – Ongoing Adjustment !
OR IN THE PURSUIT OF FRONT
ROW OF THE GRID LAP TIMES
(allowing to go deeper into the corners with increased traction & braking response)

Search by Vehicle